How much does an automatic driveway gate cost?

How much does it cost to install an automatic driveway gate?

Angi says most homeowners spend between $2,380 and $8,000.²

Automating a gate that is already hung is its own figure. HomeGuide (2023) puts the cost of automating an existing gate at $400 to $5,500.⁴ Automatic gate installation covers what to settle before the work starts.

How much does it cost to repair an automatic gate?

Angi puts typical automatic gate repair at $550 to $1,500, with an average of about $900 (May 2026).³ Angi says emergency or after-hours service may add $50 to $200.³ Gate opener repair covers the causes LiftMaster’s troubleshooting chart documents.

What do keypads, remotes, intercoms and solar add?

Each add-on has its own figure, and the publishers scope them differently. HomeGuide (2023) puts remotes at $75 to $300 each and keypads at $100 to $800.⁴ HomeGuide (2023) puts an intercom system at $500 to $4,500+ before installation, and Fixr at $1,000 to $7,000.⁴⁵

For solar, HomeGuide (2023) says solar-powered gate openers add $400 to $2,000+ to installation costs, and Fixr puts the solar power source at $500 to $2,000 in materials.⁴⁵ Gate access control and solar gate openers cover what each add-on does.

Exit sensors are scoped by where they sit. DoorKing places an automatic exit loop 20 to 100 ft from the gate, so the gate is open or opening as the vehicle arrives, and gives 18 by 48 in as the minimum loop size.¹⁵ Mighty Mule’s FM138 exit wand has a 12 ft detection field on a 50-ft cable and is placed 3 to 50 ft from the gate.¹⁶

How much does a gate opener cost on its own?

Mighty Mule’s own store lists its swing-gate opener kits at $339 to $879,⁶ and online retailers list the seven operators in the equipment table at $1,329 to $3,192.99 (Sept 24, 2026).^78910111213

What decides the scope of a gate job?

The gate, the site and the add-ons. The sources price the add-ons directly; for the gate and site, they set what the equipment has to handle:

• The operator has to match the gate. LiftMaster rates its RSW12UL swing operator for gates up to 1,000 lb at 6 ft, falling to 400 lb at 16 ft,¹⁷ and its LA400UL linear actuator for gates up to 850 lb at 10 ft, falling to 550 lb at 16 ft;¹⁸ LiftMaster’s RSL12UL product page lists gates up to 25 ft and 800 lb.¹⁹
• Below −4°F, these models are rated only with a heater. LiftMaster rates the RSW12UL and RSL12UL from −4°F to 140°F without a heater and down to −40°F with its HTR heater, which runs on 110 to 250 Vac and cannot be used with a solar application.²⁰²¹¹⁷
• A fire access road brings approval. In Fort Collins, gate design and locking specifications are submitted for approval before installation, and electric gates need a means of opening by fire department personnel.²²

In Fort Collins, a single gate across a fire apparatus access road must be at least 20 ft wide, or at least 12 ft where the fire apparatus access road is a divided roadway.²³ D103.5 items 9 and 10 require electric gate operators, where provided, to be listed to UL 325, and gates intended for automatic operation to be built and installed to ASTM F2200.²² The swing vs. sliding guide compares the two gate types line by line.

Do you need a permit for a driveway gate, and what does it cost?

It depends on the jurisdiction, so each line stays with its own city or county.

• Fort Collins. Fences up to 6 ft tall are exempt from a building permit; the city’s exemption list doesn’t name gates separately.²⁴ A gate across a fire apparatus access road needs fire code official approval before installation.²²
• Unincorporated Larimer County. In unincorporated Larimer County, the base electrical permit fee is $147 for a job valued at $2,000 or less.²⁵ Where a driveway meets a county road, Rural Area Road Standards section 10.4.16 says the longest vehicle using the access, trailers included, must be able to clear the traveled way with the gate closed,²⁶ and the county’s access-permit guidance lists a 50 ft minimum gate setback for single-family accesses.²⁷
• Unincorporated Weld County. The county’s building fee schedule prices electrical work that isn’t new living area on job value; the tiers are in the table above.¹⁴
• Greeley. Greeley’s development code requires a building permit for any fence or wall over 6 ft;²⁸ the city’s building permit fees are set by job valuation in its 2024 Building Permit Fee Schedule.²⁹

The fire-access guide covers what each fire authority asks of a gate, and the Greeley, Loveland and Windsor pages cover their local rules.