Service area · Weld County
Automatic gates in Greeley.
What the City of Greeley's fire and development codes say about gates and fences, what needs a permit, and what changes for contractors in 2027.
Service area · Weld County
What the City of Greeley's fire and development codes say about gates and fences, what needs a permit, and what changes for contractors in 2027.
Local specifics
Four local facts, each with its source.
Greeley adopted the 2021 International Fire Code.1
Greeley has not adopted Appendix D, so a gate falls under the general security-gate section, 503.6.1
In Greeley, fences in the front setback or in front of the front building line are limited to 3.5 ft, or up to 6 ft for an ornamental design at least 75% open, such as wrought iron.2
Greeley requires a city contractor license for permits starting January 1, 2027, for all applicable trades.3
Permits & codes
City of Greeley text, row by row.
| Requirement | Greeley |
|---|---|
| Fence in front setback / in front of front building line, standard design | 3.5 ft maximum2 |
| Fence in front setback / in front of front building line, ornamental and at least 75% open | Over 3.5 ft, up to 6 ft2 |
| Fence or wall over 6 ft | Building permit required2 |
| Fence setback from a right-of-way or no-build easement | 1 ft minimum2 |
| Fence setback from a sidewalk | 2 ft minimum2 |
| Fence setback from an alley | 3 ft minimum2 |
The 2021 International Fire Code, without Appendix D. Greeley adopted the 2021 International Fire Code,1 and its code adopts Appendices B and C but not Appendix D, so a gate there falls under the general security-gate section, 503.6.1
Greeley’s code exempts one- and two-family dwellings from sprinklers “unless otherwise required based upon fire flow, fire apparatus access, to include gated communities, or other life safety hazard as deemed by the fire code official.”1 The fire-access guide sets Greeley’s text beside Fort Collins, Loveland and Windsor.
3.5 ft for a standard design, or up to 6 ft if it’s ornamental and at least 75% open. Greeley’s development code limits front-setback fences to 3.5 ft, and allows 3.5 to 6 ft only for an ornamental design at least 75% open, such as wrought iron.2
Setbacks are measured from what the fence faces: at least 1 ft from a right-of-way or an easement that prohibits structures, 2 ft from a sidewalk, and 3 ft from the edge of an alley.2 Sec. 24-502(e) sets fence setbacks but no setback specific to a driveway gate.2
Any fence or wall over 6 ft needs a building permit,2 and Greeley sets building permit fees by job valuation.4 Greeley enforces the 2023 National Electrical Code with its 2021 I-codes.5 Greeley requires a city contractor license for permits starting January 1, 2027, for all applicable trades including general and specialty contractors.3 Colorado already requires a state license to work as a journeyman electrician, master electrician or residential wireman.6
Weld County’s open parcel data lists 500 residential parcels of at least 1 acre with Greeley as the location city.7
Greeley averages 5.5 nights a year at or below 0°F and 34.9 in of snow under the 1991–2020 normals.8 LiftMaster rates the RSW12UL and RSL12UL from −4°F to 140°F without a heater and down to −40°F with its HTR heater;91011 the cold-weather guide compares more models.
National cost figures are on the driveway gate cost page. Automatic gate installation and gate opener repair cover the work itself, and sliding driveway gates covers slide gates.
Services here
Common questions
Greeley adopted the 2021 International Fire Code.1
No. Greeley's code adopts Appendices B and C but not Appendix D, so a gate falls under the general security-gate section, 503.6.1
In Greeley, fences in the front setback or in front of the front building line are limited to 3.5 ft, or up to 6 ft for an ornamental design at least 75% open, such as wrought iron.2
From 2027. Greeley requires a city contractor license for permits starting January 1, 2027, for all applicable trades including general and specialty contractors.3